Description

Air Flow 22 - 190 m3/min

Compressed air is used commonly for power tools and equipment in production and finishing processes or to activate valves and instruments. The compression process itself causes the concentration of moisture, of the lubricant oil vapours and the particles of impurities present in the air sucked from the compressor, up to levels that can damage the pneumatic equipment, increase the need for maintenance or ruin the finished product.

The MG dryers allow to condensate and effectively eliminate the moisture present in the compressed air, preserving the system. All MG models are equipped with high efficiency scroll compressors and DRYMODULE aluminium heat exchangers able to guarantee extremely low dew points in all conditions as well as reducing pressure drops to a minimum along with energy consumption.

Benefits

• Compact 3-in-1 DRY MODULE aluminium heat exchanger with integrated stainless steel separator
• Constant dew point in all conditions
• Low environmental impact and reduced carbon dioxide emissions thanks to the use of environmentally friendly refrigerant R407C and the use of top quality materials that can be recycled.
• Quick and easy installation
• Simplified maintenance
• Maximum reliability

Technical features

• Carbon steel sheet structure, hot-painted with epoxy powder RAL7035
• Environmentally friendly refrigerant R407C
• High energy efficiency hermetic scroll compressors
• High energy efficiency 3-in-1 compact aluminium heat exchanger
• Finned coil condenser with copper pipes and large aluminium fins
• Axial fans
• Throttling capillaries
• Hot gas by-pass valves
• Microprocessor controller tDRY, with many parameters and 15 alarms such as: high temperature, low temperature, temperature probe fault etc.
• Chronology of the alarms with memorisation of the last 50 events
• General alarm free contact
• Remote ON/OFF clean contact
• Standard iDRAIN programmable timed condensate drain
• Phase monitor
• Refrigerant compressor crankcase heater
• Maximum ambient temperature = +46°C
• Maximum operating pressure = 14 barg
• Maximum air input temperature = +65°C
• Electric protection rating = IP54.